ncaa jewelry wholesale Virtual machine VMware installed Mac OS, as soon as Apple ’s boot screen appears, what is going on automatically restarting?

wholesale chain jewelry 用VMWARE安装Mac OSX Tiger 10.4.4 X86rn首先说明,这个版本是FOR X86的,APPLE终于把MAC移到PC上来了,至于原因,网上说,APPLE跟IBM合作出现了问题,所以, Apple prepares with both hands and moves Mac to Intel's X86 processor. However, it is indeed that time, if Microsoft's Vista comes out, and the interface effect is better than Mac, it is estimated that the MAC wants to enter the PC market. It's even more difficult. However, now, no matter what, the UI of Mac is indeed the top. No matter what you feel, it is really cool and dazzling and the user experience is great
. In the past, I was for the past, for my sake Putting Mac, once tossed N times, it was all failed. Pearpc was able to install MAC, but what about it, the speed is slow
It this time I got the Mac OSX Tiger 10.4.4 x86 That's right, it is indeed the X86 version
First of all, this ISO image can be directly loaded into a virtual optical drive with Daemon this time. The CD -ROM image I get is 4,588,544KB, which is 4G. Because I do n’t have a DVD optical drive, so , I can only use the virtual optical drive, and then use VMware to install
The VMware I use is 5.5.1 version. If you want to use GSX Server 3.2, but I think, it is not necessary to
First of all Before installing, take a look at:
1, Mac OSX 10.4.4 x86 version of ISO mirror image
2, daemon tool virtual optical drive software
3, vmware 5.5.1
4, empty One of the hard disks a

The configuration of my machine
P 4 2.4G (supports overline, but because the motherboard does not support it, it does not use the hyper -thread function)
Geafa 845GV Motherboard (Integrated Sound Voice Network)
768m Kingstone DDR 400 (Unfortunately, my host only supports DDR 266, so the performance is discounted)
2x80G hard disk 1x40G hard disk
1cdrom 40x n1CDRW 48X

It my configuration is to be honest, not high, especially the motherboard. When buying, it saves money, and I don’t think so much. Add a good graphics card

The host operating system is Win2003
, but the host operating system has been installed with too many software. Below is the list:
Visual Studio 2003
VISUAL Studio 2005
sql server 2005
MX 8
offic E 2003
Photoshop 9
smartdraw 7.5
tudio

It at first glance, it is a computer for development, all of which are giant monster software, especially SQL 2005. A lot of memory
. If you use WinXP and keep the system lightweight, I think, the MAC fictional with VMware must be good. 4 ISO mirror images Insert Daemon virtual optical drive i: medium
2, open VMware, build virtual machines, my virtual machine, I allocated 384MB memory for it, and the optical drive i (that is, the optical drive from Daemon fictional. ), Hard disk, use that 40G physical hard disk. After building, edit the virtual machine, delete the sound card, or delete the network card, because I am afraid that because of the sound card or network card affect my installation, I delete it.
3, start the virtual machine, press F2 to enter the BIOS Setup. Both the mouth and serial port are disabled, set the soft drive, and set the soft drive controller to Disable. When installation, encounter a prompt, which is related to the COM port. There are many articles on the Internet that the hard disk should be initialized first. In fact, whether it is Linux, or Windows, or MAC, it provides a special hard disk tool to partition and formatting the hard disk during the installation process (but,,,,,, to,,, to,,, to,,, to,, to,, to,, to,, to,, to, to format the hard disk (however,,,,, to,,, to,, to,, to,,,,,,,, When I installed it for the first time, I still download it here, because I did not make the virtual machine full screen, so I did not see the menu on the top of the MAC)
5, after starting the virtual machine, displayed Darwin, this shows this, this is displayed. This is displayed. This is displayed. At that time, you have to press Enter to start installation. Soon, you will see the apple that was bite deep on the light gray screen. Note that in order to prevent you from making low -level errors like me, please press Ctrl Alt Enter the car. The full screen of the virtual machine screen, otherwise, it is easy to see the Mac toolbar on the top
/Article // 200606/.png
2, next, select language
/Article // 200606/200606/ .jpg
3, select Chinese, continue
/article // 200606/.jpg
5, the above picture, because I want to grasp the picture, I do not use the full screen, so you can see my office. The Mac toolbar mentioned, the picture below is
/article // 200606/.jpg
Under the practical toolbar above, there is a disk tool. With it, you can manage the MAC disk to manage the disk of Mac The disk partition of the partition
mac is very simple. If you are lazy, you can choose your hard disk directly, and then click "erase" The entire hard disk can be divided into one zone. The erase of the Mac is equivalent to the formatting in the PC. After erasing, the partition name becomes black, otherwise it is gray. Because I operate this part under the full screen (otherwise, it ’s very troublesome to see this toolbar), so I ca n’t catch the picture, but this part is also simple. As long as you do the full screen, you can do it. After the partition, turn off the disk tool. At this time, the display protocol, point continues, MAC will let you accept
/article // 200606/.jpg
7. Click the installation to start installation
/article // 200606/.jpg
8. The installation process lasted on my machine for about an hour. Look at him at that time, of course, if you install it on a physical machine, I believe that it should be possible to do it in half an hour. After the installation, it is prompted to restart. Click to restart to restart. After restarting Guide from the optical drive, but this time, we do not press any key, because the prompt of the screen is "Press any key to install ..." Well, do not press any key to start the Mac. After starting , Wait, it is worth mentioning that there are already five strokes and five strokes and smart ABC input methods in OSX
/Article // 200606/.jpg
9, completed, finally succeeded. Hey. Hey. Hey. Hey. Hey. Hey. Hey. Hey. Wait .... How can I restart ???? Here, I encountered a problem again, obviously to the place where the desktop is displayed, and restarted it, then restarted, found that, it could not restart at all. What happened, I tried it a few times, and found that the VMware's hard disk indicator and the optical drive indicator flashed a few times, then it was destroyed, and then the screen did not respond, strange. At this time, I was going to uninstall the OSX in the Daemon optical drive. CD -ROM image, ready to replace the deep mountain red leaves to launch the plate for diagnosis, but suddenly discovered that Daemon prompts "cannot uninstall, ... lock", hey, will the problem appear here, repeatedly tried it a few times, and always uninstalled it. The MAC disc image in the i disk is dropped. So, exiting VMware, you can't remove the disc image of the disc. This is strange. With the attitude of trying, modify the virtual machine settings, delete the optical drive, then add the optical drive, use the ISO, use ISO Mirror optical drive, select the mac OSX installation disc image, and then start the virtual machine. This time, OK. Maybe for some reason, the DAEMON virtual optical drive i is locked and cannot be read by Mac. I solved the problem. Below is the screen after the opening
/article // 200606/.jpg
The apple in the menu bar, then click DOC, check "opening amplification", try again, OK
It, try the Dash Board of Mac, it ’s really good, Microsoft’ s Wallet may be imitated by others
/article // 200606/.jpg n One thing makes me uncomfortable, that is, I can't start the MAC directly from the hard disk. I checked it. The partition of the MAC is activated, and it can be guided. At that time, Mac does not guide at all, and the CD -ROM indicator and the hard disk indicator are not flashed. It is really puzzling. I searched on Google. No one encountered this problem. Can I only guide it from the CD -ROM? I hope to encounter it. The installation of the master's point
mac is relatively simple. I personally think that it is easier than the installation of Windows, but everyone is in contact with it for the first time. When installation, I am afraid that there are many problems. Moreover, after all, it has just been transplanted to X86. I hope that Mac OSX X86 will get better and better
btw: This article uses Snagit 7.0 grabs to grab the map, and uses ACDSEE tailoring.