jewelry cardboard boxes wholesale What glue can be used for the flower pot to stick (porcelain)

5 Comments / default / By

jewelry cardboard boxes wholesale

5 thoughts on “jewelry cardboard boxes wholesale What glue can be used for the flower pot to stick (porcelain)”

  1. Reginald

    israel wholesale jewelry The ceramic pot can be sticky with 502 glue. If 502 glue is exposed, the trace water vapor in the air is touched, that is, it is catalyzed to quickly converge and solidify and sticks, so it is called the instantaneous adhesive.
    Pucting information:
    502 The chemical molecular formula of glue is CH2 = C (CN) -COO-C2H5, colorless transparency, low viscosity, flammable liquid, single ingredient, solventless, slightly irritating, easy to taste, easy Volatile, volatile gas, weak tears.
    502 glue has a certain toxicity, but it is just that the toxicity will be reduced after curing, but 502 glue is a cyanocytic compound after all, and there will be toxic substances after decomposition. When the humid water and gas are catalyzed, it quickly converges and solidifies. Increase reaction under the catalysis of trace water in the air, quickly solidify and stick to the sticky. rn502胶水为用于多孔性及吸收性材质之接着，用于钢铁、有色金属、橡胶、皮革、塑料、陶瓷、木材、非金属陶瓷、玻璃及柔性材料像胶制品、皮鞋、软、 Hard plastic and other adhesion between themselves or each other.
    Reference materials: Baidu Encyclopedia-502 glue

  2. Bethany

    wholesale jewelry made in indonesia 1. Ceramic adhesives can stick ceramic flower pots.
    Pelaste adhesive refers to glue (adhesive) that can bare ceramic. Ceramic adhesives are generally divided into three categories: ceramic organic adhesives and ceramic inorganic adhesives, and metal powder adhesives.
    2, 502 glue. rn502胶水为用于多孔性及吸收性材质之接着，用于钢铁、有色金属、橡胶、皮革、塑料、陶瓷、木材、非金属陶瓷、玻璃及柔性材料像胶制品、皮鞋、软、 It is self -or interconnected, but it is specially treated on the surface for difficulty adhesive materials such as polyethylene, polypropylene, polytrafluoroethylene, etc. It is widely used in electrical, instrument, machinery, electronics, light instruments, medical care, light industry civilian and other industries.
    3, similar products and 401, 415, etc. The effect is similar to the 502, and the price in the market is relatively expensive; the low price is also green and red glue, which is also a type of AB glue. The price is relatively cheap.
    4, Yantai epoxy resin glass ceramic glue belongs to the dual -component epoxy resin adhesive, adopts domestic advanced technology and imported raw materials, developed from precision, room temperature solidification, fast solid epoxy glue, has applications with applications. Wide, light and transparent, low toxicity, low toxicity, non -irritating, odorless, use economy, fast and safe, water -resistant and other characteristics.
    The high and low temperature (-60 to 150 ° C). Crystal process bonding and repair suitable for the craft industry.
    This Frames of Frames of Frames, Bonding and Repairing of Bond of Low Arcs, Decoration, and Glass Crafts.
    can also be used for bonding and repair of ceramics, glass, crystal, gems, jade, jewelry, electronics, electronics, various crafts, and other materials. The effect is good.
    Pucting information:
    The ceramic organic adhesives and ceramic inorganic adhesives commonly include: ceramic adhesives for epoxy systems, silicon ceramic adhesives and organic silicon ceramic adhesives. The main performance differences of ceramic inorganic adhesives are temperature resistance. The maximum temperature resistance of organic adhesives is usually between 100-250 degrees, and the maximum does not exceed 400 degrees.
    The temperature-resistant range of ceramic inorganic adhesives is usually between 600-1750 degrees Celsius. There can be soft elasticity in ceramic organic adhesives, or hard rigidity, while ceramic inorganic adhesives are usually rigid and hard. Common ceramic metal powder adhesives mainly include some low -melting point metal powder, and its temperature resistance depends on the melting point of metal powder.
    Pela ceramic organic adhesives mainly include: ceramic adhesives, organic silicon system adhesives, and acrylic adhesives.
    The ceramic inorganic adhesive mainly includes: silicate adhesive, phosphate adhesive, aluminum acid, etc.
    Ceramic gold powder powder adhesives mainly include: pure aluminum powder and other
    Reference materials: ceramic adhesive -encyclopedia

  3. Wayne

    wholesale jewelry ring settings You can use AAA glue.
    Step
    1, cleaning
    Plores to wash the dust with water first, and then use a brush, knife toothpaste and water to clean the tea scale and break the mouth.
    2, bonding
    The choice of adhesive is the key. Only the adhesives with high adhesion strength, strong aging resistance, and moderate curing time can repair the flower pot. The advantages of this glue are colorless and transparent, and the speed of curing is fast.
    3, add the same pigments as the glazed color to the break in the fracture. Adhesion is a highly difficult process in the flower pot. When operating, it is necessary to take care of the upper and lower left and right in accordance with the schedule of advance. A piece of errors cannot be made. If a piece of dislocation, it will not be strict in the end. When adhesion, be careful not to apply too much glue. Apply the glue to the center of the purple sand grid. You must press it when the fitting, and tied it with a white cloth belt.

  4. Noel

    wholesale real insect jewelry The porcelain flower basin is best to stick with glass glue, the most convenient.
    Glass glue is a commonly used adhesive for family. The main components are sodium silicate (NA2O · msiO2) and acetic acid and organic silicone. Sodium silicate is easy to dissolve in water and is sticky. The south is also known as water glass, and the north is also known as flower alkali.

    This:
    Plip the dirt, water, and loose layer on the construction surface first, and apply beautiful paper or adhesive tape on the side of the gap, and then apply glue. After applying the glue, scrape the straight adhesive strip with a round rod, and tear the beautiful paper or adhesive belt open before the colloid.

Leave a Comment